Hi guys,
having trouble getting my SE/30 up and running post Rominator II and ram installation.
ok thats not entirely true i can boot into the Rom side and it shows its 24bit with 128MB yet wont boot into my actual HHD with the revised configuration. Please note i had 4MB and standard rom which booted fine in to 7.5.5.
now I understand from big mess of wires there’s some issue with 7.5.5 and you need res edit 2.1.3 and disc copy 6.3.3.
So the question. How do i fix this, do i need to downgrade my 7.5.5 to 7.5.3 if so how do i do that? Does picker help?
Then do i need to take the rom and ram back out, put the old stuff back in?
load res edit. This bit im unsure of too as I’ve never used res edit before.
if anyone can assist whos successful upgraded there SE/30 to 128mb on 7.5.5 using the rominator to make it 32bit clean i would really appreciate any advise. On the plus side i now know all the hardware works.
Neal
having trouble getting my SE/30 up and running post Rominator II and ram installation.
ok thats not entirely true i can boot into the Rom side and it shows its 24bit with 128MB yet wont boot into my actual HHD with the revised configuration. Please note i had 4MB and standard rom which booted fine in to 7.5.5.
now I understand from big mess of wires there’s some issue with 7.5.5 and you need res edit 2.1.3 and disc copy 6.3.3.
So the question. How do i fix this, do i need to downgrade my 7.5.5 to 7.5.3 if so how do i do that? Does picker help?
Then do i need to take the rom and ram back out, put the old stuff back in?
load res edit. This bit im unsure of too as I’ve never used res edit before.
if anyone can assist whos successful upgraded there SE/30 to 128mb on 7.5.5 using the rominator to make it 32bit clean i would really appreciate any advise. On the plus side i now know all the hardware works.
Neal