Hi,
I've been looking for on Farnell, Digikey, Mouser, Google, Ebay,... you name it for a 620uf 400v snap-in capacitor ( D=40mm, H=42mm ).
It's in the Sony PSU of the Mac SE series.
I could find a 680uf, 400v snap-in but I don't know if it's a good idea to replace it with this value.
Probably a 10% difference won't hurt however my concern is it might overload the rectifier with higher inrush currents as it's just after it.
Here's a link to the schematics of the SE PSU:
http://mac.i4all.eu/SE_Netzteil.gif
I've been looking for on Farnell, Digikey, Mouser, Google, Ebay,... you name it for a 620uf 400v snap-in capacitor ( D=40mm, H=42mm ).
It's in the Sony PSU of the Mac SE series.
I could find a 680uf, 400v snap-in but I don't know if it's a good idea to replace it with this value.
Probably a 10% difference won't hurt however my concern is it might overload the rectifier with higher inrush currents as it's just after it.
Here's a link to the schematics of the SE PSU:
http://mac.i4all.eu/SE_Netzteil.gif