somorastik
Well-known member
Hi,
Point 1.
I cant boot from pcmcia cf adapter on my 5300cs, where system is broken on the hard drive.
Point 2.
With CF-IDE adapter i get
sad mac codes:
> 0000000F
> 00000001
in both slave and master mode
I decided to replace the hard drive in mine, the 5300 CS, since it always disconects when I try to erase it or install onto it-seems broken. Disc Warrior didnt help.
I tried to overclock as well, as stated on http://www.alksoft.com/5300_overclock.html but:
"In the meantime, though, I managed to change the multiplier on my 5300cs by moving R48 to R46 and R43 to R127. "
resulted in me unable to boot.
And in the resistors of interest http://www.alksoft.com/5300_images/resistors_close_half_reducd.jpgyou marked up R47? Because of what?
R46 is horizontal?
I reverted the resistors back the mac boots but I have the problem with CF.
Mails I send to alk-soft returned back.
Point 1.
I cant boot from pcmcia cf adapter on my 5300cs, where system is broken on the hard drive.
Point 2.
With CF-IDE adapter i get
sad mac codes:
> 0000000F
> 00000001
in both slave and master mode
I decided to replace the hard drive in mine, the 5300 CS, since it always disconects when I try to erase it or install onto it-seems broken. Disc Warrior didnt help.
I tried to overclock as well, as stated on http://www.alksoft.com/5300_overclock.html but:
"In the meantime, though, I managed to change the multiplier on my 5300cs by moving R48 to R46 and R43 to R127. "
resulted in me unable to boot.
And in the resistors of interest http://www.alksoft.com/5300_images/resistors_close_half_reducd.jpgyou marked up R47? Because of what?
R46 is horizontal?
I reverted the resistors back the mac boots but I have the problem with CF.
Mails I send to alk-soft returned back.