• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Performa 6400/180

Rodus

Well-known member
For £5. It has the L2 cache, PCI ethernet and a 2MB PCI graphics card of some sort. I love the look of the 6400/6500 series, much curvier then most other old macs.

 

WorkgroupServer

Well-known member
I like the 6400, but I think it has the most terrible video card of all macs built in standard. Your lucky you have the PCI one.

I've owned five 6400s over the years, and I'm now down to one:

300mhz g3, 168mb ram, 10gb hard drive.

 

LCGuy

LC Doctor/Hot Rodder
Indeed - the 6400 was the very last Mac to use the ol' Valkyrie, which debuted with the LC630 back in 1994. It was crap back even in the days of the 630 - the fact that they were still using it on the 6400 just goes to show how much trouble Apple was in back then.

 

Temetka

Well-known member
I got another 6500 a few weeks ago.

A 350MHz model IIRC.

Not too shabby maxed out on RAM, a faster HD and a Rage128 for Video.

I quite like it actually.

 

Dan 7.1

Well-known member
6500's never came as a 350MHz model :p they topped out at 300.

grats on the grab, i love my 6500.

 

skeletor

Well-known member
I like the 6400, but I think it has the most terrible video card of all macs built in standard. Your lucky you have the PCI one.
I've owned five 6400s over the years, and I'm now down to one:

300mhz g3, 168mb ram, 10gb hard drive.
yes, nice form factor..But the 6400-6500, was a bear in getting it open to piddle around inside..LOWEND MAC, Labeled them 'road apples '

Some of the 6400 and 6500, suffered from bad internal modems.

 

skeletor

Well-known member
I really need a G3 upgrade for it, already have a spare 128 GL to go in.
I'm trying to recall WHO came out with the G3 cards for the 6400..

(did they have one for the 6500 ? )

Sonnet, Newer, and maybe (?) microMac...

maybe none of the above...This might be an ebay item..

 

LCGuy

LC Doctor/Hot Rodder
I really need a G3 upgrade for it, already have a spare 128 GL to go in.
I'm trying to recall WHO came out with the G3 cards for the 6400..

(did they have one for the 6500 ? )

Sonnet, Newer, and maybe (?) microMac...

maybe none of the above...This might be an ebay item..
The very first company to offer G3 upgrades for the 6400 was VImage. They were also the first company to offer G3 upgrades for the 4400/7220 and Tanzania clones. Shortly after that, Sonnet, Newertech and (i think) XLR8 followed.

 

Temetka

Well-known member
My 6500 has a 300MHz G3 from Sonnett in it. Makes the machine pretty snappy compared to the gimpy 603e CPU.

 

Rodus

Well-known member
The 6400 was never considered a road apple, just the 62xx-63xx

So, has anyone here got a G3 upgrade they'd consider selling me

 

QuadSix50

Well-known member
The 6400 was never considered a road apple, just the 62xx-63xx
So, has anyone here got a G3 upgrade they'd consider selling me
Also exclude the 6360, as that was one of the first with the internal design change from the 5xxx/6xxx models.

 

Bunsen

Admin-Witchfinder-General
If you can spare one of your two PCI slots, apparently the Sonnet 7200 G3 works - and they're knocking them out for $19 for 400Mhz these days.

I say apparently, because ISTR someone here tested it. A bit of searching might turn it up.

The L2 cache slot G3s do turn up on ebay with some regularity, and they tend not to be too expensive

 
Top