You can use the support email that shipped with your unit to report bugs, but I watch this thread as well.
I'll have to look more closely at the documents when the second one shows up then (current status being "Shipping Label Created, USPS Awaiting Item")
Which firmware version are you running? LUN handling was changed in v0.11.0 to fix this issue in Win98/XP.
I think it originally shipped with 1.0.0 or 1.0.1, I also tried after updating to 1.0.2 but got the same results. NetBSD is more likely to stress some less-used SCSI features, as it also run on multiple workstation/server-class systems that actually used multiple LUNs per ID back in the day...
Random things that could be useful if you have nothing better to do (just ideas, not requests! my only request is for MacSD to work with NetBSD/mac68k) :
(a) being able to use extended partition for drives, or using a partitioning mechanism on the SD that allows for more than 4 partitions, so as to be able to export more than 3 drives using this mechanism;
(b) being able to export drives using non-zero LUN for OS that supports this features, so that you can use a large SD card even on machines/OS with limited disk size by having more than 7 drives in total.
The partition mechanism is super convenient I think, because I can then read the Apple partition table in Linux from the 'real' partition and exchange data using 'hfsutils', e.g. if the SD card is on /dev/sda and my MacOS 8 boot disk is on partition 2 of the SD (so seen by linux as /dev/sda2), I can do e.g.:
Code:
sudo hmount /dev/sda2 2
sudo hcopy -r CWPro_2_Tools_199710.cdr :
And it's a lot faster than going through the network from the Mac (and it skips the copy necessary via MacSD commander when you put the data on the first partition).
Cordially,