• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Mac Classic troubles

Ildefonso

Member
I recently bought a faulty Mac Classic. No bong, no raster at the start at all. Opened the little creature I found some leaky capacitors in the power section of the logic board, which I changed. I also washed-cleaned the logic board. But this is the result, no bong at startup and the image in the attached video.

Any clue where should I dig?

Thanks????

 

Ildefonso

Member
Hhhmmm, sorry for the mistake, I wanted to say "power section of the analog board". And ca'nt see the video I atached???

 

Ildefonso

Member
Yes. That's has been the solution.

I've recaped the analog board and resoldered every solder joint and the Classic has return to live!!!

Now there rest two problems to be solved: no sound (wich will require recaping the logic board) and a faulty disk drive, not very hard to be repaired (I hope :) )

Thanks for the answer

 
Top