PacificState
Well-known member
I have 8 x 16MB OWC 30-pin SIMMS I'd like to use with my SE/30. Unfortunately, even though they're lower in height than the ROM SIMM it came with, I find that the last SIMM snags consistently on the metal lip of the cage above it as I insert the motherboard and comes loose.
Questions:
- Is there anything I can do to avoid this?
- If not, are there lower profile 16MB SIMMs available new that *do* fit?
- It says elsewhere that 4x16MB in Bank A is not a supported configuration, which I can confirm - however, this *does* work with a Rominator SIMM installed. I'm intending to use this machine with a Carrera 040 card, though - will that clash with the Romainator?
Thanks!
Questions:
- Is there anything I can do to avoid this?
- If not, are there lower profile 16MB SIMMs available new that *do* fit?
- It says elsewhere that 4x16MB in Bank A is not a supported configuration, which I can confirm - however, this *does* work with a Rominator SIMM installed. I'm intending to use this machine with a Carrera 040 card, though - will that clash with the Romainator?
Thanks!