compu_85
Active member
I have a G3 Walstreet II / PDQ 300, and want to upgrade the hard disk. I picked up a Ableconn IIDE-MSAT mSATA to 2.5-Inch IDE Adapter and Zheino 128GB M3m SATA SSD.
The jumper configuration is the same as the Seagate 160g spinny drive I removed (the original 6gb drive was dead when I got the machine) - no jumper = master. I verified the ID select pins are not connected to anything in the little adapter PCB.
Whenever the SSD is hooked up, the CD-ROM doesn't work. The machine knows something is in the bay, but System Profiler doesn't see the CD-ROM.
I tried re-jumpering the SSD as CableSelect and Slave... those settings let the CD work, but the SSD does not.
Any suggestions for other steps to try? Or do I need to get a different mSATA adapter?
Thanks!
-J
The jumper configuration is the same as the Seagate 160g spinny drive I removed (the original 6gb drive was dead when I got the machine) - no jumper = master. I verified the ID select pins are not connected to anything in the little adapter PCB.
Whenever the SSD is hooked up, the CD-ROM doesn't work. The machine knows something is in the bay, but System Profiler doesn't see the CD-ROM.
I tried re-jumpering the SSD as CableSelect and Slave... those settings let the CD work, but the SSD does not.
Any suggestions for other steps to try? Or do I need to get a different mSATA adapter?
Thanks!
-J