I am upgrading my wife' s quicksilver with a sonnet sata controller and 1 Tbyte drive. We must have room for all those pictures.
all the picture end up in her user folder which is on the startup drive ie the new drive should I partition it or not. Having multiple drives does not work with her...
Now that the 7600 is ripping mp3 and surfing the wed I feel the need for a dvd burner any suggestions?
I will soon get my atto ul2s installed I would like to pull the internal cd out and put dvd burner in. I have been searching and it appears this may not be possible with out switching to ide...
I have a mac cube that ran fine for about a year and the hd failed so I put a drive I pulled. this drive worked for a couple of months and it started having problems it would spool up the wind down to a stop, start stop over and over it was about 2 sec up and 2 sec down. so i ordered a new...
I had a bad hd and replaced it 2 weeks ago bad sectors.
now it has stopped starting up
1 it chimes
2 i get a gray screen no pin wheel
3 nothing happens.
i have tried booting off tech tools cd but no luck. same as above
this issue happened 2 times and the machine sat for some time and...
2 questions
1 i have a 867ghz quicksilver with 10.4.11 and what looks to be a factory apple scsi atto install can i add ide drives "i have several" with the scsi drive or must i get an ultra 3 drive. also with a scsi 2 dive work as well?
2 my other quicksilver 1ghz with 10.4.11 i wanted to...
get this 75 bucks for a 867 mhz quicksilver with 768 meg ram
the case was fantastic
the videocard turned out to be a geforce 3
and inside i fine an atto ul3d scsi card and seagte hard drive
and an adaptec 2930cu
[8D]
the dlink quit me see other posts. i thought i had a bad airport card
but i rescued a linksys router with a wireless usb adapter
I am hooking up my printer now
good by dlink
i have the lime ibook running but it will not connect to my dlink 2310.
1 even turned off the security for a while?
how do you know the airport card is working?
i have went through the setting nothing helps?
help! i have been upgrading the 7600 one upgrade is a usb card . it does not seem to work.
i started with a belkin card that was usb 2 so i removed it and put it in the g4 dual which works perfectly.
i also have a dh-pc4 card.
it does not work either i have tried a mac pro mouse. and...
i want the best video card for a quicksilver g4 dual 1 g machine.
well less than 150 $ us.
i have a 7500 apg currently per alk [8D] which works great
i would like to dual boot to os 9 also
i checked out my local pc store they hate macs.
it looks good but no ac adaptor
and it has bad written on the battery
will the machine start with an ac adaptor and no battery?
can a bad battery harm the machine.
i have a radius 1 meg video board for an se It came from a machine that was used to test raduis monitors bacj when motorola produced them. It was use to power the 19 two page display. The monitor was twice the size of the se.
it would be great if someone could use it