Search results

I've got a Umax C600 clone that's missing two of the 5.25" bezels and want to plug up the holes... Anyone know what 5.25" drive mounting rails work? Alternatively, anyone know if there's compatible dummy bezels available? Regular ones don't seem to work properly if I remember correctly.

I'm looking for an obscure Apple tool (Diagnostic Sound Sampler) but haven't had any luck. On a whim, I thought I'd try the MacGUI downloads site which is very messy but often has stuff you can't find elsewhere. Unfortunately I'm presented with this silly message...

Recently picked one of these up, with the negative and slide trays, thankfully. It didn't come with the driver CD unfortunately, and I've been unsuccessful in finding a copy. Anyone here have the drivers/CD? I'd love to get this thing running!

So, I have a Mac II but… Man, the fan is rather VOOSHy, almost like a vacuum cleaner! Anyone had success replacing the PSU fan with something quieter? I understand that the PSU fan is the only thing cooling the entire system, but I'd still like to make it quieter… The Mac II uses a Panaflo...

I just got a few PowerBook 500 series power adapters, so I'm finally able to use the 540c and test the 2.5" SCSI2SD I received a few months ago. It works fine for the most part, however… Anything that involves the disk spinning down causes the machine to freeze. This could be the default...

I figure I've finally purchased something worthy of a conquests post… Yep, a NeXTstation Mono. Maximum memory (32mb). Got it from a craigslist seller for $80. Decent condition. Somewhat dusty, a few dings in the case, and what appear to be a few paint splotches. Should clean up easily...

Searched the site, but I couldn't find any information on this. I recently acquired a 2nd Mac Classic. It's missing its case screws, so I opened it up... The little board at the end of the CRT was disconnected, so I reconnected it. When I tried powering it up, it made a buzzing noise, which...

Not sure If I should post this here, but it seems appropriate… I'm trying to disassemble a leaking 5300 battery (want to remove the cells and put a few weights in there), but I can't seem to get the dang thing open… Haven't found any pictures of disassembly, either… Any advice on how I could...

Probably something minor, but when I try to log into my admin user account, it shows a terminal window for a couple of seconds, and then reloads the login page... What am I doing wrong?