• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Search results

  1. LOOM

    The suction cup pins broke

    I detached/pulled off the suction cup on the flyback transformer from the CRT tube on my Macintosh Plus to do some work on the motherboard. As I did that the pins inside the suction cup that connect it to the outer parts of the tube broke off when I pulled it out. I've marked the pins with an...
  2. LOOM

    Apple CD 300 (SONY CDU-8003A) ejects caddy

    I got hold of a Apple CD 300 (SONY CDU-8003A) drive that turns on and shows up on the SCSI bus when I list all the devices. I when I try to put a caddy into it, it just ejects the caddy instantly. I opened it up and cleaned the laser head with some alcohol, but it still acts the same way. ...
  3. LOOM

    Looking for two Macintosh Plus analog part numbers

    Hi, :beige: I'm recapping my Plus analog board, but the fuse holder broke of (Part F1 on the analog board (international version)). I noticed it barely had a connection with the fuse, and just touching it made the metal break off. Do anyone know the part number for the fuse holder? Same...
  4. LOOM

    QuickCam Software problems

    Hi, I'm trying to start the Color QuickCam software (QuickPICT and QuickMovie) on my Quadra 950 running 7.6.1. I've tried versions 2.1.2 and 2.1.3, but the computer freezes a few seconds after I've clicked the icons. I've connected the camera to the modem port, but it freezes even if it's not...
  5. LOOM

    AppleCD versions and differences

    I can't find that much info about the AppleCD devices. When did Apple release them? What's the differences between the models? I know AppleCD SC was introduced in 1989, but what's the difference between 150, 300, 300e, 300 plus, 600i and 600e plus? (Are there more models?) PPC G4 "Graphite"...
  6. LOOM

    Using the Macintosh Display Card 8●24GC in a Quadra 700

    Is it possible to use this graphic card for a second monitor in System 7.6? For a dual monitor setup... The sources I've found state that it supports System 7.0 and later, but no one mention 7.6. One source say you can't enable the accelerator, but can I still hook up another monitor to it...
  7. LOOM

    a Macintosh Display Card

    I got hold of a Macintosh Display Card 8•24GC rev B ROM today. Can anyone see on the chips how much vram this is?
Top