• Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.

Recent content by glay78

  1. glay78

    PowerBook 540c screen problems

    Hi Colin how is it going? If you need the flex cable let me know. I should have a spare. PM me for the price.
  2. glay78

    PowerBook Duo 280c no chime

    I'm better with soldering iron, not air gun. These big caps were soldered using air gun and its my first time using it. My subsequent or infant all other recaps are done with soldering iron and tantalum caps are they are smaller which gives more space to work on. I've recap a PowerBook 180c LCD...
  3. glay78

    Mac SE30 help

    I have tried with ram and without, both gives the same results as well as washing the board. I’ll be doing tracing from UE8 and the Glue Chip since I’ve googled and some help here. Will update. Thank you for all the help.
  4. glay78

    Mac SE30 help

    Hi I’ve got an SE30 board that powers up to show this. Before and after recapping shows the same thing. No chime. Any help? All recap capacitors traced are tested to be fine.
  5. glay78

    Color Classic Mystic Software mod?

    I’ll try and update. Hope the board works
  6. glay78

    Color Classic Mystic Software mod?

    Still need to edit the enabler file. But it’s easy too.
  7. glay78

    Color Classic Mystic Software mod?

    I’ll try in my other CC then. Will try it with 7.1 this time
  8. glay78

    Color Classic Mystic Software mod?

    Yes indeed this is better for me cos I’m just trying to get it work out. If u mod I am unable to put in my CC2 board anymore. Thought I still have a CC1 with Presto 040 but I wish to keep them all in original state if possible
  9. glay78

    Color Classic Mystic Software mod?

    Hi I read that it’s able, check out 2.1.3 https://colourclassicfaq.com/mobo/mystic.shtml
  10. glay78

    Color Classic Mystic Software mod?

    I’ve got a Performa 578 board which is basically an LC575. I recapped it and did the software mod on my 7.6.1 it boots with chime but I get no display. The SCSI2SD reads and boots into system. I’ve did the system mods and tried 7.5.3 also gives me the same result. I’m not in the direction to...
  11. glay78

    Mac Classic Analog Board Completely Dead

    I have a working spare analog board. Let me know if you are keen
  12. glay78

    PowerBook Duo 280c no chime

    But it’s now cleaned up, recapped and got a new display.   
  13. glay78

    PowerBook Duo 280c no chime

    you are right, this is a spare part board and it still leaked. Look at the leak.   
  14. glay78

    Newton Power Supplies

    Isn’t it 9w? I have it for sale, as well as the dongle, keyboard, battery pack (doesn’t hold charge anymore) and stylus for sale.
  15. glay78

    Duo 270c - Yay or nay?

    This is how one looks like.
Top