I would charge $100 USD including the return shipping for the SE/30 logic board recapped, using my own supply of tantalum caps to replace the aluminium electrolytic caps, and new through-hole caps to replace the through-hole ones. I only do the logic boards. I test afterwards.
If you're looking for work done with specific caps, or with your caps, I'm not interested, unfortunately. I only recap with capacitors I'm familiar with. If you have other machine models, the cost may vary, depending on the work required. If you send more than one board, cost goes down.
Just want to clarify on this post because I’ve received numerous messages lately on this topic:
1. I was testing the waters of recapping boards for people. I did a couple and decided to suspend doing it at all for others.
2. I no longer do this for people. I never offered a business/service on this, it was a trial and I didn’t like how it ended up. The stress of working on someone else’s board was too great for me, worrying about ruining something.
I did have someone ask me to recap their board, and when I ran into problems, I was blasted for ruining their original, owned from new, “baby”. I eventually got their board to work, but the damage was done. I never want to go through that experience again, so I decided to just no longer do it.
Again, if you’re looking for a “recap service”, I’m not able to do this for you. I never offered an official “service” as a business, I tested the waters by accepting a couple boards for recap.