-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
Se/30 recap
- Thread starter imactheknife
- Start date
Never mind.. i forgot about the two axial caps i removed.. will replace today and see..
Ok, so no change.. is my ram bad, rom?? I bought it last week. I started it up before purchase. It gave a vertica line screen. It pressed reset and she booted. Brought it home and immediately cleaned board with isopropyl. Decided next day to take pads off and recap, wash again. Let dry, then try it out. So far, same nasty lines. Any ideas?? Or should it to branchus creations lol.. the radial cap is all i had for a 470 so will leave for now, not permanent.
Attachments
Voltages are good, rom, memory and entire board cleaned. She does boot, confirmed tonight with internal and external scsi. Still no sound, and has that nasty screen until mouser pointer shows up. Any ideas how to get rid of that screen vertical line yuck. Would love sound back too.
Attachments
Check all the traces in the sound circuit. They can be broken and check traces to/from the Apple Sound Chip.
Source: https://recapamac.com.au/macintosh-se-30/
Thank-you, will check it over!
sound works now I checked all traced and they were good, . but I still get vertical line screen for 4-5 seconds then chime and normal screen. Proceeds to boot.
All ram slots work, scsi chip works, boots from internal and external. Is this a possible rom issue? How can I get it to chime and work normal when switch is turned on. Right now it is almost 10 seconds before she goes to normal screen and boots and works normal.
