Jump to content

Lisa 2/5 Video Board Image Deterioration


Recommended Posts

I recently brought my Lisa 2/5 back out of the cupboard to have a tinker during lockdown.

Unfortunately after a few minutes the contrast goes very dark and the image starts to shrink on the right hand side.

I haven't dared to leave it on long enough for something to go bang...

The BU406 is quite hot, but probably within normal limits. 

 

Any ideas would be much appreciated :lisa2:

I've attached the video board schematic for reference. 

APPLE_050-4012-H-10 - Video Board.png

LISA1.jpg

LISA2.jpg

LISA3.jpg

LISA4.jpg

Link to post
Share on other sites

Thanks again for the ideas.

I've had the card out a few times to inspect it and always made sure everything was connected back up, but i'll check again.

Going on the assumption that as BU406 is hot, maybe something in the Horizontal drive circuit is failing, i.e. Row A of the schematic.

I'm definitely not an expert in CRT circuitry/flybacks, if anyone has some insight into this it would be most appreciated.

I've started looking at the biasing passives but they've all checked out so far

 

Link to post
Share on other sites

I have worked on dozens of these boards, and the capacitors have never been the problem for me...

 

Try replacing the voltage 7824CT regulator U1 ( at lower right corner of the board ), an indication that this is failing is that the the resistor R1 will be burned/cooked (and should be replaced also).  This is a very common fault on these boards as they age.

 

Good luck!

Link to post
Share on other sites

I've recently noticed that all of my Lisas (Lisae?) are now showing various video symptoms. At least one is a trimpot issue which should be easy to fix.

Another the display over time scrunches up at the top, but is otherwise readable and playing with the trimpots doesn't help.

Another goes out of focus. So I've also got a bunch to repair.

 

So it seems whatever these issues are, whether capacitor, voltage regulator, or trimpot, or other, this is roughly the lifespan of the analog video boards. I'd like to collect the symptoms and fixes, and catalog these so I can update the lisafaq with them: https://lisafaq.sunder.net/single.html#lisafaq-hw-vid_jumpy

 

Link to post
Share on other sites
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...