Jump to content

Are Lisa 2/10 and 2/5 I/O boards interchangeable


Recommended Posts

Hi Lisa enthusiasts,

 

I have a 2/5 which has I/O problems due to the corrosion and myself and a fellow member are trying to diagnose. I need to find out if the I/O board is the fault or potentially the edge connectors or traces on the motherboard. I don’t have a spare I/O board unfortunately.
 

Is it possible to interchange a 2/10 I/O board for a 2/5? This will require use of the same 2/5 motherboard, CPU card and memory boards although the latter 2 I believe are interchangeable between any Lisa system ROMs dependant I suppose if you have the Mac XL screen mod and 800k drive. A source using the Lisa FAQ says it is but the Lite Adapter should see modifications which involve cutting traces. So if I disconnect the Lite Adapter can I do it? Has anybody tried this?

 

Ive also read many posts on this forum that say you will destroy or damage the system if you plug in a 2/10 I/O board into a 2/5 system and since the rarity of these boards are forever increasing I would like very much to not add another dead one to the pile. 
 

Max

Link to post
Share on other sites
  • 4 weeks later...

You don't even have to disconnect the Lite adapter, the floppy drive simply won't work. The Lite adapter does 2 things: a pin converter to hook up the sony, and a PWM converter for the disk speed signal which is different between the twiggy and sony disks.

 

-J

Link to post
Share on other sites
  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...