nater Posted August 17, 2020 Report Share Posted August 17, 2020 8 hours ago, blusnowkitty said: In addition to the above update, here's some news on the mAcTX LC front: I do intend to produce another run of boards at some point. However due to the uncertainty of USPS's future, I will not be offering any more for sale until this picture becomes a little more clear. Maybe I will have to move to UPS or FedEx, maybe USPS can rebound from this - I just don't know at this point, and I'd rather not make the buyer deal with this headache as well. At some point there will be a revised model that adjusts the position of the power output thru-holes as well as adding in power status LEDs like the IIc board. I'm in two minds about this, though. If I use thru-hole parts, then the board loses a lot of its original elegance and simplicity and looks way too crowded. If I go surface-mount, then I would only offer the boards as a pre-assembled kit. Choices, choices... Looking forward to a new run (I missed the first run because I was expecting this forum to email me thread updates, which inexplicably didn't happen for a few months!) I can confirm that USPS is unreliable right now, I have a cable en route that shipped out of CA a month ago and is finally in MA after being in a black hole for two weeks. When I opened up an inquiry with USPS it popped back into existence after a couple of days. FedEx and UPS have been reliable. Quote Link to post Share on other sites
tokyoracer Posted August 17, 2020 Report Share Posted August 17, 2020 I'm stoked about a possibility of a 630 series PSU solutions. Already had 3 of them buggers blow in quick succession. It's also one of my very favourite 68K models too being mine is the DOS version with all the AV/networking gear. Oh and IDE, which saves a lot of headaches. Quote Link to post Share on other sites
CC_333 Posted August 17, 2020 Report Share Posted August 17, 2020 I bought a new-used phone recently (an iPhone SE, just like my old one whose Touch ID broke), and it seems to have just fallen off the face of the earth. No tracking, no indication that it shipped, nothing. I've been inclined to think that it's an unreliable seller, but it could also be due to USPS' recent unreliability. Either way, hopefully I didn't get ripped off. c Quote Link to post Share on other sites
68kMLA Supporter Torbar Posted August 26, 2020 68kMLA Supporter Report Share Posted August 26, 2020 Your project was shown on the latest Adrians Digital Basement video(4:13 in) Quote Link to post Share on other sites
just.in.time Posted August 27, 2020 Report Share Posted August 27, 2020 @blusnowkitty I’d be interested in one for the LC1-LC475/Q605 variants when you decide to do another batch of those. Also, will the future Performa 6200 variation likely work with the Performa 6360? Quote Link to post Share on other sites
68kMLA Supporter David Goodson Posted December 24, 2020 68kMLA Supporter Report Share Posted December 24, 2020 My picoPSU-80 I bought for the macTX doesn't work anymore. Luckily I bought 2 of them and the 2nd one works so I was able to determine that it's not macTX that's broken. It's this one: https://www.mini-box.com/picoPSU-80 Any one else had a problem with these? I can't see any obvious disconnection points. Any chance that 80w isn't enough? Should I use a 120w one instead? I haven't tried to get it replaced by mini-box yet. Quote Link to post Share on other sites
Amiga of Rochester Posted January 6 Report Share Posted January 6 (edited) I do a lot of Macintosh recapping IISI, IICI, LC* - This is invaluable to me. Please let me know when available, I'd REALLY like to buy this. I can solder my own, even order my own parts...Is that possible? Edited January 6 by Amiga of Rochester Quote Link to post Share on other sites
ironborn65 Posted January 6 Report Share Posted January 6 I'm also interested in a couple of mAcTX LC, are they still available? thanks all the best PF Quote Link to post Share on other sites
Mikerophone Posted January 11 Report Share Posted January 11 I have a Quadra 605 whose PSU went belly up -- this would be just the ticket! Are they still available, and how? Thanks! Mike in Bethlehem, PA Quote Link to post Share on other sites
68kMLA Supporter joshc Posted February 18 68kMLA Supporter Report Share Posted February 18 @Compgeke @blusnowkitty Is there any update on availability of these please? It seems there are a lot of buyers waiting so an idea of when these might be available again would be great. Thank you. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.