Search the Community
Showing results for tags 'plastic'.
My iMac G3 had arrived today and when I unpacked it, I've noticed some beige plastic around the VGA and RAM lids, I took it out. Then I noticed that the bottom left CRT holder is cracked and there's a screw visible, I opened the iMac and while I was opening it more and more beige plastic pieces started to fall out of the iMac. The bottom plastic case was a bit stuck, but at the end, the beige plastic had snapped and released the right part of the white bottom case. Also, the CRT doesn't fit perfectly with the front panel, there is a small space between the monitor glass and the plastic case.
Hello all, I wanted to hear your thoughts on this; I recently acquired a recapped SE/30 (which as of this past weekend is now using a CF card for solid state storage and super-fast startup!) The machine is beautiful, but what has proven a mixed blessing is the damage to the plastic of the front casing that occurred during shipping (I say this because I ended up getting the machine for free via UPS shipping insurance due to the damage and an unseated ROM SIMM which caused SimasiMac) To cut to the chase: Has anyone had any experience repaired cracked or broken off plastic on thes
Along with my PM6500, I pulled out my Q950 out of storage. I lucked out, the battery did not explode. But first thing I noticed was that the logic board was not in place properly. In looking about, there were more broken plastic pieces in the case. Removing the board, and cleaning it up of the broken pieces, I got the logic board to fit in place properly. It is obvious that somebody was as its side door was open, and for a while something moved inside. That has to be cleaned up. I'll be using an alcohol/soap mixture and a scrub brush to clean out the inside of the case in the bathtub.