Search the Community
Showing results for tags 'hub'.
Found 2 results
-
Hi All, I have an Asante NuBus card discussed here that does not play nicely with the 2 D Link 10/100 hubs that I have. These hubs work fine with my Asante IIsi/SE/30 cards. To get the Nubus card recognized I need to short the pins on the card after boot sequence has started. The Nubus card works fine (w/o shorting the pins) when attached to an old Hawking Tech wifi router. I don't like this hardware as it has no way to disable its old wifi. While I could get a hub like this Netgear EN104TP I am wondering if this could be solved with the ethernet cable. All I have is C
-
I’m looking for a new power adapter for a 5-port Asanté FriendlyNet Ethernet hub (since I bought it without one). The hub states 5VDC but how many amps is the output? I have tried 1A but can’t get a stable network going between my PowerBook G3 (Pismo) and Mac IIcx (MacCon+). (They sometimes show up in the Chooser). The strange thing is, when I use port 5 for the Mac IIcx, next to the up-link port connected to my cbn router, I can connect to the Mac IIcx from the PowerBook, but when I try to connect from the Mac IIcx to the PowerBook the chooser crashes. Help really appreciated
