Search the Community
Showing results for tags 'flyback'.
-
So I'm starting a new topic to update my old one. Check out the whole story on my original issue. After finally getting a new fly back for my mac plus the fast ticking never changed. I checked the voltages on the caps and sure enough the flyback still is not getting enough power. So what I did was first heat up the caps to see if any of the 33 and 22uf caps are bad. They didn't change any thing other than speed up the ticking a little. I have never got it to stop ticking while using the heatgun. Then I thought it was my motherboard so I drowned it in vinegar carefully using an exact-o knife on
- 18 replies
-
- macintoshplus
- recap
-
(and 3 more)
Tagged with:
-
Hello people! I recently acquired a Mac Plus while doing a clean out of my grandfather's old factory. The keyboard and mouse were FUBAR, as they had been left under an old can of paint which leaked all over them. He said that there was also a hard drive somewhere, but we couldn't find it. I scrubbed as much old paint of this Mac as I could, and besides from a rather even coat of yellowing, it seems to be in pretty good nick. I took it home and plugged it in, and it made the start up bong and the floppy drive made noises, but the screen never fired up. I cracked open the case and be
- 23 replies
-
Hi Everyone, I recently acquired a Mac Plus with a temperamental analog board which would only display a picture briefly whilst being tapped on the left side. I tracked this problem to a failing flyback which I have replaced, but I now get horizontal scan lines across the display which I cannot get rid of (whilst also maintaining the video brightness) by adjusting the brightness knobs. The Mac itself is otherwise working I've tried replacing R5 but to no avail. Any suggestions? Thanks