Search the Community
Showing results for tags 'broken traces'.
Destroyed a few pads on my CC and SE/30 boards. CC was the first board I tried to re-cap, with my rusty soldering skills and not the best iron. My electronics guru helped reconstruct most of the traces but we couldn't get this last one and I can't tell what it connects to. SE/30 recap went smoothly (I learned from my mistakes with the CC and took it slow) but I broke a pin off UF8 and then killed 4 traces trying to remove it!
I have a Macintosh plus and I took off the paper off the analog board I saw what no computer repairman wants to see. Corrosion all along the board. Most of it was clean but some parts had a boat 2 by 2 inches of the board completely corroded. I want to know what to do to jump them. They all are pretty far apart. Some are even 2 to 3 inches. The green upper layer has fallen off and became brittle. Some I can see under it that it's corroded. What do I do to save it and also keep it from coming back! It's running about from top to bottom and mostly around the outside of the board!