Jump to content

Von

68000
  • Content Count

    289
  • Joined

  • Last visited

2 Followers

About Von

Profile Information

  • Location
    Bothell, WA, USA

Recent Profile Visitors

1136 profile views
  1. THx @Bolle I finally got around to getting the stuff on top of the IIci out of the way... I first pulled the Daystar 601 and it booted with video just fine. After reinstalling the 601 it too worked fine. I didn't have to reseat the Ram.
  2. Hi all... I fired up my IIci after it had been sitting for a few months with some sporadic video issues. I reseated the cable that goes through 2 KVMs to my Sun LCD monitor and it fired up and worked fine for about 10 minutes and then failed to this patterns: I rebooted the machine and it started its boot sequence and then failed again to the same pattern. Subsequent restarts no just give a black screen...the monitor senses there is signal (its LED goes from Orange to Green) however there is nothing but black. The IIci has a Daystar 601 66MHZ and it
  3. If you remember, could you write it down and share the steps? I just got Nisus Word Processor 3.06 on disk and I'd like to make backups.
  4. Yep, that is the one and it has been great except for its locations for hard drives. There is one in the 3.5" bay and then another towards the top/back of the case. Since we are in Hacks...here is a mod that I made: This is a bracket that I made to hold 2 drives from some case internals I had lying around. It holds 2 SSD drives one of them a 2.5 in an adapter bracket. And here is that bracket mounted in the Inwin case making it easier to get at the drives: Not the best shot but the new drive caddy is behind the flashlight.
  5. Not sure on the make...the branding is from the PC shop that I got it from circa '98 called Cutting Edge Computers in Redmond WA.
  6. Please count me in as well. I am hoping to get one of my IIfx boards up and running soon.
  7. Oh yeah, that cases is bedazzled with many LEDs: The case came from CompUSA and I think it is a white-labled InWin or KingWin. I added the stainless drawer handles on top to move it around as well as the fan in window to match the stock fan on the top window. It runs XP on an intel 915GUX board which is nothing special. My plan after doing some backup on this machine is to get it to dual-boot to a linux disto. THe case to the right is my many-boot Museum box mentioned here.
  8. I think this may qualify as a hack... At the office I have a workstation that can be used standing or sitting. With the work from home in place, to get a standing workstation I took and old coffee table and sat it on top of my home office desk with monitor arms holding the 2 Tunderbolt monitors.
  9. Looks very nice! I finally got my SE/30s out and am still working on them...
  10. If this happens, please count me in for 2 of these.
  11. So the problem you just fixed was with a Micron Xceed card card have a line on screen when used in conjunction of a grayscale adapter? I have 2 Xceed cards and one of them has the line...
  12. These are the 2 IIsi Daystar adaptors that I have. Also have the Daystar that allows you to put an accelerator or cache card in the SE/30.
×
×
  • Create New...