Jump to content

jeffmr4

6502
  • Content Count

    39
  • Joined

  • Last visited

Everything posted by jeffmr4

  1. Hi Ken, Does this happen with the auto-eject mechanism installed? I noticed it wasn't installed in this video.
  2. sata side is the same, ide is slightly different between 2.5 and 3.5".
  3. Here's the power adapter, https://www.ebay.com/itm/New-IDE-Molex-4-Pin-Male-To-Serial-ATA-SATA-15-Pin-Female-Power-Adapter-Cable/383894892663?epid=11034589830&_trkparms=ispr%3D1&hash=item5961eb3077:g:a8cAAOSwiCdf-NyI&amdata=enc%3AAQAFAAACgBaobrjLl8XobRIiIML1V4Imu%2Fn%2BzU5L90Z278x5ickkxFtV7J5P58ubuVigtBH%2FeySQ5eMXi1vugyXlLPs4%2FUBZt%2F8KnZNxKIurmuuPTySQxRruyHi%2BkCm2lqtP%2FmGNhFyYXLxHdSmul788PUHbfw9GMOncmtDIRU2GjzQVqSukX4k92TycXcNg7KxK8XQjVzJFP6azxoa09mrFA6clGwsaNnJAE9wHsYODb5zNpgRLHJX9vzXGxsK6zYNWRQCgpU%2BQnDDRInFdNUpbi54qA6UNfvYuilLBSqo%2FzCEMHm8Lm6M55%2FHxb89AErpSRW
  4. https://www.ebay.com/itm/PATA-IDE-TO-SATA-Converter-Adapter-Plug-Play-7-15-Pin-3-5-2-5-SATA-HDD-DVD-NEW/153964247236?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 or this which is bootable. You'd just have to get a molex power adapter to adapt the regular to the sata power. Those are probably on ebay or at a local computer store. https://www.ebay.com/itm/4-Port-SATA-PCI-Card-for-Apple-Macintosh-Mac-OS-PowerMac-G4-SSD/132581321334?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
  5. If you’re using an ATI card there are some acceleration drivers on macgarden. This may not help your resolution problem but it could make things a little bit faster.
  6. What happens if you connect a drive to it and look at it in disk utility?
  7. Hello, I am replacing the logic board and cpus in my dual 500 gigabit g4 and am wondering if I need to use thermal paste for the cpus. From the heatsink I took off of my board I just see a rectangular piece of black tape/plastic (very thin, ?) on the heatsink and a small piece of plastic over the cpu. But, I don't see any previous paste. Does anyone know if it requires it? Thanks.
×
×
  • Create New...