Jump to content

JCBone

6502
  • Content Count

    7
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thinking about it, an external enclosure has it's merits. Maybe one could put the 68net, the scsi2SD (with easier access to the SD card) and a raspberry pi zero into it and velcro it to the back of the SE/30… One would need a reeeeally short SCSI Cable though, and somehow 5V form inside the case.
  2. Well yeah, it's an all in one! With neat cabling, this should be a nice addition. Maybe the pi would need an external antenna or wifi dongle outside the case because all the interference of the crt? Picture this: I'm doing the protocols at my local firefighter station, when there are official gatherings etc. How cool would it be to turn up with an SE/30, do the protocol and print it immediately on the wireless printer . This thing is from 1990! Uh, where's my copy of Framemaker! Hmmm, is there a way to share a cups driver as a AppleTalk LaserWriter? And since all is rev
  3. *g* No, no problem. Just had that Idea. Just how to hide it all in the SE/30… maybe take the board out of a really small switch and put it in there, too. The is a lot of space where the HD used to be.
  4. A small board with pins to solder into the board and a ribbon cable connector plug would be nice, yes. I just posted another Idea in the other SCSI to ethernet thread: Wouldn't it be great if one would put a raspi 3A or something in there too, running an AppleTalk Server for the SE? And a lighthttpd so you can configure it with netscape from the SE/30 side? Then, one could route the connection over the Wifi of the Raspi, which could also provide a smb share over Wifi… The problem would lie in the RJ45 connection. Maybe a loopback cable that would only be con
  5. I'd like to have the adapter inside my SE/30, daisy chained to the SCSI2SD. Wouldn't it be great if one would put a raspi 3A or something in there too, running an AppleTalk Server for the SE? And a lighthttpd so you can configure it with netscape from the SE/30 side? Then, one could route the connection over the Wifi of the Raspi, which could also provide a smb share over Wifi… Just a thought.
  6. Great project! Would it be possible to design an internal version for the SE/30? Thanks, Jörg
×
×
  • Create New...