Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by D@llas

  1. Anyone know what screw size is needed to secure the back panel of a Performa 5xx ?
  2. Update: I may have figured this out with the help of the patched Apple HD SC app. It is initializing now...
  3. I picked up a Seagate ST32151N 2.1GB 50pin SCSI hard drive. Im hoping to put it in my Performa 550. Problem is...I don't know much about SCSI. http://office.manualsonline.com/manuals/mfg/seagate/st32151nwwc.html It does not show up as an option during OS install or under any Apple disk utility or SCSI setup. I've tried playing around with the different jumper setting/termination settings. Does this hard drive even work in this computer? Any help on the what the correct jumper settings should be for a performa 550? Thanks
  4. I had good success following this guide on-line, with some modifications: https://imgur.com/gallery/hecBMSW Instead of microwaving the belt (wife absolutely forbid it), I boiled water in a pot and put the belt on a small strainer so that it was suspended about 1/3 from the top. Let boil for 10-15 minutes Follow the rest of the directions on the page. Clean the black roller and make it semi tacky. After removing the belt, i gave it a VERY quick spray shot of Loctite spray adhesive. Just enough to make it a little tacky as well. Drive
  5. i also have the AUII adapter and full 36MB RAM chip available....let me know if you're interested
  6. i have a spare 33mhz 68LC040 from a 540c i could sell you. Let me know if you're interested
  7. Hi all. I bought a new battery for my iBook G4 and although on the battery it shows 5200mAh OS X is only seeing 4222 (with a cycle count of 4). Same with coconut battery. It registers the original battery capacity at 4400mAh, with a maximum capacity of 4222. any ideas?
  • Create New...