Jump to content

MacSE/30

6502
  • Content Count

    77
  • Joined

  • Last visited

Profile Information

  • Location
    Kocaeli, TURKEY

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Where is this jumper exactly? I have a IIci that was working perfectly a while ago. Now when I turn it on it makes a click sound and turns itself off. The PSU is fine tried in a Q650. I swaped their HDDs before IIci stopped working. I might touched the jumper during the swap! Could it be?
  2. I tried w/ stock, IIsi and IIfx ROMs all same results. I have another set of 16 MB ROMs I'll try with them but before that I decided to wash the MoBos. I'll report back.
  3. I recently recaped my two MoBo’s with tantalum caps. Although my soldering skills are amateur at best MoBo’s are working with some problems I mention below. I accumulated couple of CPU upgrade cards, adapters, etc over time: - 1 x Mac IIsi ROM - 1 x Mac IIfx ROM - 1 x Daystar IIsi Turbo 601 angle adapter (1 PDS slot only) - 2 x Daystar IIsi angle adapter w/ PDS pass thru (one of them has math processor slot) - 2 x Daystar IIsi angle adapter w/ a NuBus port - 1 x Supermac angle PDS adapter - 1 x Stratos TwinSpark adapter - 1 x Daystar PowerCache 030 40 MHz P33 - 1 x Daystar Tur
  4. I have a PB 550c w/ PPC CPU and a PCMCIA RevC expansion module. I wonder if I can use OHCI compliant PCMCIA USB 2.0 card that are abundant in ebay w/ 8.6
  5. I can confirm that "Microtech PCD 47B" and SanDisk Ultra II 4GB CompactFlash card is working nicely in Q650. I couldn't try it in my SE/30's cause both of them require a recap. It should work in SE/30 as well. Microtech PCD 47B is an internal unit with PCMCIA Type I/II/III, CompactFlash and SmartMedia slots. However, CF card in a PCMCIA module did not work. The converter module I used was very cheap stuff so with another module it could work. Formatting the CF card was troublesome. Since the card comes in DOS format it must be re formatted to HFS. Mounting was very difficult. Apple HD
  6. I do run Mac OS 8.6 on my Q650 but the above link says It is possible to run 9.1 which I could not do so far. I can accept 9.0.4 though.
  7. I tried to run 9.1 on Q650 w/ PowerPro w/o success. If anyone accomplishes it. please let me know.
  8. Thanks for the link. Do you know the size as well?
  9. Does anybody know the font name and size of the "Macintosh SE" insciption in front of the computer?
  10. Is it possible to downgrade the Q950 oscillator to 50 MHz and use QuadDoubler 50 MHz upgrade? Just a thought!
  11. Neither IIvi nor Q650 does not give 640 x 480 output with the rasterops adapter.
  12. 832x624 was common for Apple's monitors... not sure why it was chosen over the standard 800x600 though. Another one of Apple's quirky, non-industry-standard, decisions I guess! Why would an Apple monitor needs a VGA adapter to work with an Apple or Macintosh computer? I do not think 832 x 624 is an Apple standard.
  13. With rasterops adapter I cannot get 640 480 resolution in my VGA monitor eventhough monitor supports 67 Hz.
  14. I saw those on ebay. Can you get an 800 x 600 resolution to a SVGA monitor with that? The thing that I do not understand is this 832 x 624 resolution. Is there such VGA monitor? VGA is 640 x 480 and SVGA is 800 x 600. Anybody has an idea about this resulution?
×
×
  • Create New...