Jump to content
  • Posts

    • Wow, can't believe this was three years ago! Looks to me like it might be reasonable to think KBD_ID1 is likely the QWERTY section and KBD_ID2 would be the NumPad?
    • DAMN, the internal drive has given me absolute hell in this Mac today. It started giving me the sad Mac and spitting the disk out. 
        So I completely tore the drive down, took the heads out and stuff:     Got all that old grease off of the worm gear. Didn’t help one bit.   I spent about 6-hours on it and to keep it short, it was the track-0 sensor yet again. I loosened the screw on it,  moved it back just a hair, and it has been working ever since! Hopefully it’ll keep working this time...
    • I got the SuperMac Spec/8 SI dialed in about as perfectly as it gets. Tweaking the horizontal and vertical start points I've got rounded corners all around the clock. I think I got it saved as one of three user defaults. Gotta take pics before I tear it down and try to get the Radius TPD in the SE dialed in.   No joy on the SE/30 Pivot card in the IIsi. Gotta test it for function on one of the BigAss CRTs to verify that it's working, but no energy for that today. Old card might not be compatible with the 20MHz IIsi bus, some cards weren't. If so it'll be SE/30 testing one day.
    • Actually .... I just realized I have a spare Plus keyboard. Platinum I think, with some yellowing, but in great shape otherwise. It’s possible the comma key switch needs replacing (might just need the WD40 treatment though), otherwise it works perfectly. $50 to a 68kmla’er. DM if interested. Happy to test it again also. 
    • I'm so glad to see this closer to becoming a reality for people who want some extra RAM!    Just out of curiosity @joethezombie, which PCB fabrication place did you use that was able to do 0.050" PCBs? All my experience is with hobbyist-level services like Seeed Studio and PCBWay which both just do 1.2 mm. To get the correct thickness, did you have to go to somewhere a bit more "professional" and less "hobbyist"?   It still bothers me that I never quite got to the bottom of the SE/30 ROM SIMM thickness issue back in the day. At least, I think it was a thickness issue...