Jump to content

syntaxcollector

6502
  • Content Count

    2
  • Joined

  • Last visited

  1. syntaxcollector

    Booting Mac Plus with scsi2sd...

    I'm way late to the party here but I have a v5.1 with a 2GB card, formatted with Apple HD SC Setup 7.3.5 and then installed 6.0.8 on it. Won't boot. Then I did this: http://www.codesrc.com/mediawiki/index.php/Mac_Plus and it worked. It booted. Make sure "Enable Unit Attention" is OFF Change SCSI Selection Delay to 0 Enable "Respond to short SCSI selection pulses" Use the latest scsi2sd-util from here http://www.codesrc.com/files/scsi2sd/latest/ to make the changes. USB is enough to power it. Make sure you first "load device" make changes and then "save device" The scsi2sd-monitor tool is useful to see if your SCSI is setup correctly.
  2. syntaxcollector

    Cant get SCSI2SD to boot Mac Plus

    K so I had the same issue and found this thread. I have a v5.1 with a 2GB card, formatted with Apple HD SC Setup 7.3.5 and then installed 6.0.8 on it. Won't boot. My buddy found this for me: http://www.codesrc.com/mediawiki/index.php/Mac_Plus and it worked. It booted. Make sure "Enable Unit Attention" is OFF Change SCSI Selection Delay to 0 Enable "Respond to short SCSI selection pulses" Use the latest scsi2sd-util from here http://www.codesrc.com/files/scsi2sd/latest/ to make the changes. USB is enough to power it. Make sure you first "load device" then make changes and finally "save device" protip: The scsi2sd-monitor tool is useful to see if your SCSI is setup correctly. I made screenshots of my config.
×