| Author |
Topic |
|
macuserx1
Starting Member
5 Posts |
 Posted - 19 Feb 2002 : 08:06:52
I posted abut this in 68k conquests, and then moved it here. I am using IP net router and a hub to share an internet connection. Here are my questions:1: I would like to run IPNR on the quadra605 and use it as the router, is it to slow? I tried to do it and, my iMac could not connect to the net. It works the other way though, if I use the iMac as the router the quadra can connect.
2: If I cannot use the Quadra , can I assign it an IP that can be accessed from outside of the local network?
Thnx for any help
|
AnubisTTP
Junior Member
USA
308 Posts |
Posted - 19 Feb 2002 : 14:26:41
In regards to the second question, you cannot set the IP address on the Quadra to a non-LAN address because all the other addresses have been sold to companys or ISP's already. Even if you did set it to someone elses IP address I doubt IP net router would route it because more than likely IP net router can only reconize LAN network addresses.AnubisTTP
68k Macintosh Liberation Army
Macs Liberated:15 |
macuserx1
Starting Member
5 Posts |
Posted - 19 Feb 2002 : 16:44:29
Well, I got the quadra working as a router and it works great! Plenty fast enough. As for the external IP, I don't need it since the erver is on the original IP. thnx
|
networking w/ a quadra and other questions...
68k of the Week: kastegir's PowerBook 180.