Author |
Topic |
|
cinemafia
Guerrilla Recon Leader
USA
2965 Posts |
Posted - 15 Feb 2002 : 15:57:37
Dana directed me to the Retromac hotline server, but I didn't find anything I needed there. I did find a copy of Conley SoftRAID 2.2.2 on another hotline server, but it's apparently for OS 10.x. Any version from 2.0 and up is for PCI PPC's, anyway. If anybody knows of a hotline/ftp server or site that Has a 1.x version of SoftRAID, or any other 68k RAID app that subsequently supports a FWB Nubus JackHammer card, I would greatly appreciate it! Otherwise, I just have to keep digging through hotline servers...666th poster to the 68K Macintosh Liberation Army Forums Mod of the Mac II series Forums Total 68K Macs liberated: 7 Visit my site! Edited by - cinemafia on 15 Feb 2002 16:20:23 |
Trash80toG-4
NIGHT STALKER
USA
2899 Posts |
Posted - 15 Feb 2002 : 16:10:19
quote:
I just have to keep digging through hotline servers...
digging by hand? no googling or equal?did hdt have raid toolkit? was it included in the summer bundle with the cd-rom toolkit etc, a few years back? jt
|
danamania
Official 68k Muse
Australia
1193 Posts |
Posted - 15 Feb 2002 : 16:13:03
quote:
Dana directed me to the Retromac hotline server, but I didn't find anything I needed there. I did find a copy of Conley SoftRAID 2.2.2
tis there - just in a not-so-obvious-spot :D when you go there, go to the downloads folder, then to: util - system related drivers hard disk fwb and inside there are about 5 utils - FWB Raid Toolkit 2.0.7 is one... be well dana
|
cinemafia
Guerrilla Recon Leader
USA
2965 Posts |
Posted - 15 Feb 2002 : 16:19:42
Ahhh, it is in an obscure place. I was searching under disk utilities, which you think would be the right place... thanks for the walk-through!However, I am still after SoftRAID 1.x, as everywhere I've looked it pulls much better times than FWB RAID Toolkit over a JackHammer card! 666th poster to the 68K Macintosh Liberation Army Forums Mod of the Mac II series Forums Total 68K Macs liberated: 7 Visit my site! |