Author |
Topic |
|
Ted Weeks
Starting Member
USA
7 Posts |
Posted - 15 Nov 2002 : 05:25:44
I did a dumb thing in an attempt to make a MacAquarium and disconnected the wires inside a M0100 in an effort to switch the aquarium's light via the mouse button. But recently, I got a MacPlus, and want to use the mouse again. Can someone open up a M0100 and tell me what color wire goes to what pin? I've seen the pinout chart for the DE-9 on the other end in the Ports-Pinouts Tech reference, but I don't feel inclined to maim this mouse any further by prying that end apart. Any help would be greatly appreciated. Or, if you're in the Chicago area and want to sell me a working M0100, let's meet for coffee, swaps, and stories somewhere... -- Ted Weeks! Duo230/DuoDock II, PB140, IIci, MacTV, LC III, Q650, Q700/PPC, 7100/G3, 7200/G3, 8500/G4, G4 Yikes, MP120/2.0, MP2100, Apple PowerCD. I like that one the most, I think. Oh, and a 3Com Audrey, too. |
MacMoose
Junior Member
USA
176 Posts |
Posted - 15 Nov 2002 : 07:11:31
Okay, here goes...hope you understand this.With the mouse sitting on the table, and the tail(cord) facing to the right, the wires are as follows: Orange wire: The pin on the far left of the plug (pin one?) Blue: Pin 2 Two Black wires: Pin 3 Green wire: Pin 4 Red wire: Pin 5 Brown wire: Pin 6 Yellow wire: bottom side of the clicky thingy. Hope that helps. ------------------ MacMoose Benevolent Genius, 68k MLA Total 68K Macs liberated: 22 and counting ------------------
|
Ted Weeks
Starting Member
USA
7 Posts |
Posted - 15 Nov 2002 : 16:56:46
Aw, thanks, man. I'll get that Plus runnin' in no time. Thanks!-- Ted Weeks! Duo230/DuoDock II, PB140, IIci, MacTV, LC III, Q650, Q700/PPC, 7100/G3, 7200/G3, 8500/G4, G4 Yikes, MP120/2.0, MP2100, Apple PowerCD. I like that one the most, I think. Oh, and a 3Com Audrey, too. |
MacMoose
Junior Member
USA
176 Posts |
Posted - 16 Nov 2002 : 21:09:44
You're Welcome.------------------ MacMoose Benevolent Genius, 68k MLA Total 68K Macs liberated: 22 and counting ------------------
|
|