| Author |
Topic |
|
Clinton
Full Member
USA
700 Posts |
 Posted - 30 Sep 2002 : 18:36:48
A Working version of the A/UX 3.1 update file?
I installed A/UX 3.01 on my Quadra 650, and it says it will not boot because the MacOS partition that is used to boot it is too old to run on this system, I need 7.1 or greater I think
anyway, any suggestions would be greatly apprecaited
thanks
CCCLieutennant Commander (Pronounced Leftennant)
Guardian of Obsolete Equipment
68k Macs Rescued: 2 Pluses, a 512KE, a Classic II, and a Quadra 650
Contraband rescued: Power Computing PowerBase 200, and a PM 8600/300
Apple // series rescued: Apple //e |
oldmacman
Full Member
USA
713 Posts |
Posted - 13 Oct 2002 : 10:07:01
The image at ftp://ftp.geo.tu-freiberg.de/pub/incoming/AUX_3.1_Update.toast_image.gz should work. Decompress it and burn it to CD.The disk image for the update to 3.1.1 is at ftp://ftp.geo.tu-freiberg.de/pub/aux/jagubox/Apple.fixes/supported/aws-tuneup-2.0/Diskimage1.hqx Official 68kMLA Music and NeXT Expert
OpenStep Page at http://openstep.topcities.com/
Macs Liberated: SE (2), LC, IIsi, PB 145b, Quadra 700, 6100 (2), PB 5300, PowerMac 5400/200, Performa 6400/180
PCs liberated from Windoze: 3 |
oldmacman
Full Member
USA
713 Posts |
Posted - 13 Oct 2002 : 10:09:21
From the A/UX FAQ: quote:
A/UX will run on the Quadra 610 and 650s (recall that A/UX
requires the _real_ 68040 chip!) with a little bit of work: You should make a copy of the A/UX Install Boot floppy and then copy the
Enabler for the Q610|650 onto this copy. You then boot up from this floppy
and install A/UX as usual. Finally, you'll need to copy the Q610|650
Enabler onto the A/UX MacPartition (or whatever MacOS disk you will use
when starting up your Mac and booting A/UX); do this by first booting off
a boot floppy or boot CD and then copy the Enabler over. You do _not_ need
to make any changes to the A/UX System Folder (i.e. the System Folder used
under A/UX).
Official 68kMLA Music and NeXT Expert
OpenStep Page at http://openstep.topcities.com/
Macs Liberated: SE (2), LC, IIsi, PB 145b, Quadra 700, 6100 (2), PB 5300, PowerMac 5400/200, Performa 6400/180
PCs liberated from Windoze: 3 |
Clinton
Full Member
USA
700 Posts |
Posted - 14 Oct 2002 : 19:58:27
Thanks!
do you know where I would find the 650 system enabler?
thanks
CCCLieutennant Commander (Pronounced Leftennant)
Guardian of Obsolete Equipment
68k Macs Rescued: 2 Pluses, a 512KE, a Classic II, and a Quadra 650
Contraband rescued: Power Computing PowerBase 200, and a PM 8600/300
Apple // series rescued: Apple //e |
|
Does Anyone Have...
68k of the Week: kastegir's PowerBook 180.