Latest activity

What's new Featured content New posts New media New media comments New resources New profile posts Latest activity
  • franklyn
    franklyn replied to the thread MacViking card found in a SE.
    ... there are Motorola ECL chips on the card and a 110Mhz quartz so I think it is a ECL Graphiccard and you need a ECL monitor for it or...
  • Phipli
    Phipli commented on Boctor's profile post.
    Hum, the one in the photos is a Dyna Comp. Sounds like the 3d printed bracket is too thick. Did you put all the insulation back in the...
  • Boctor
    Boctor commented on Boctor's profile post.
    Mine is the Dyna Comp one, so I'm using the 3D printed bracket that sits inside, and the fit is extremely tight. The two heatsinks...
  • Byrd
    Byrd replied to the thread A trash can.... Mac :).
    The other day my 2013 Mac Pro just gave up - it was having its usual sleep overnight, came to find it dead, no power, tried all the...
  • Phipli
    Phipli commented on Boctor's profile post.
    Have you checked what the heatsinks are tied to? If they're grounded there is no issue anyway. Have you made sure to tie the PSU ground...
  • Phipli
    Phipli commented on Boctor's profile post.
    It fit with clearance when I did it. How are you mounting it? Also note there are about four LC PSU designs and they have slightly...
  • jjuran
    jjuran replied to the thread Multi-threaded network app development on the 68000?.
    MacRelix has some sockets API support — TCP and Open Transport, but no UDP or MacTCP yet — and threads. It uses the Thread Manager if...
  • GreenBar0n
    GreenBar0n replied to the thread Planning my "Reloaded" SE/30 build..
    You're welcome! Will be glad to see your Reloaded board put to good use, really like that Purple v5. I've been watching ebay lately...
  • GreenBar0n
    GreenBar0n replied to the thread Doom on SoftPC on an SE/30?.
    You need a friend too? Pin D1 trace was missing/broken from my CPU to the ROM slot, so technically my XC68030 was broken. You'll be the...
    • 20260114_160657.jpg
  • Byrd
    Byrd replied to the thread LCD monitor weirdness with millions of colors.
    It looks like a hardware fault with the card, most likely the VRAM. Are you using the standard video card (has upgradable RAM you can...
  • B
    BobDaAggie replied to the thread BlueSCSI does not boot Mac SE.
    I saw that but because the external BlueSCSI works with the SC card I dismissed it. I will try that and see what happends
  • jjuran
    jjuran replied to the thread Question on widgets for classic mac os.
    I wrote about my experience of using Metrowerks' multiple target support as one of the steps toward creating MacRelix...
  • croissantking
    croissantking replied to the thread quadra 700 desktop icon corruption @ 24bit in 7.6 / 8.1.
    Isn’t that the 12” RGB monitor (M1296)?
  • F
    frontein1 replied to the thread BlueSCSI does not boot Mac SE.
    The SD Card Formatter is probably worth trying. Like it says on the bluescsi.com site, use the overwrite format option to really go low...
  • T
    theletter0xff posted the thread Macintosh Portable M5120 Backlight Upgrade Repair in 68k PowerBook.
    Recapping a portable, it happened to have the backlight upgrade installed. I did a thing to it, but hopefully this may help others. My...
    • PortableBacklight-820-0318-B-Front.jpg
    • 820-0318-B-Front.jpg
    • 820-0318-B-Rear.jpg
Show older items
Back
Top