Working Mini-DIN to standard serial cable?

[eharmon]

Before I go buy the parts and make one, has anyone bought a working Mini-DIN to standard serial cable (preferably DB9) recently?

You can, surprisingly, still buy cables, but the reviews online warn about missing wires so I am dubious.

 

[envirogeek]

If it isn't urgent, I will test what I have for Mini-DIN serial cables as I get my 7600 and G3 fired up again in the next few weeks. I probably have extras.

 

[Compgeke]

For ones I've made, I get a minidin 9 to minidin 9, lop it and half and solder the appropriate pins to a DE9 connector.

You can petty easily determine pinout of the cut up cable with a meter.

 

[zigzagjoe]

I had a similar need recently for a quicktake. I ended up taking a chinese USB (FTDI) to Cisco console cable and putting a mini din 8 end on it.


Mini DIN 8 kit: https://www.mouser.com/ProductDetail/Adam-Tech/MDP-008?qs=HoCaDK9Nz5fn5Ouk7a6Ckw==
A 3D printed TPU cover with strain relief was required as the console cable is too wide for the one from the kit.

 

[eharmon]

Thanks folks, I went ahead and built my own. This cable has all the wires and a bare end which is pretty handy! The colors are also correct to spec, at least mine was.

https://www.amazon.com/dp/B0D415MLGV