-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
What Apple Prototype Did I just Stumble Upon “Flamingo” ? 920-1873-03
- Thread starter jajan547
- Start date
Yeah that’s what I’m trying to figure out at the top left there are two USB B jacks and looks like it runs off maybe 5V, Not sure. But if it is 03 the first iPhone released 08 so this would be extremely early.
Last edited:
I'd be strongly inclined to believe this is a dev kit and not a prototype, we make kits like this for our hardware projects regularly at my company. It has so many headers it's a dead giveaway. Prototypes are usually far more polished while still having a couple debug headers etc.
How are you sure that's an Apple prototype?
In any event, I wasn't able to find any apple products with the codename of Flamingo or Cumulus. C1 was a prototype for the Bondi iMac G3 but that obviously isn't what this is.
The main chip is a microcontroller.
In any event, I wasn't able to find any apple products with the codename of Flamingo or Cumulus. C1 was a prototype for the Bondi iMac G3 but that obviously isn't what this is.
The main chip is a microcontroller.
Hmm ok. 2003 is definitely too early to be an iPhone dev board, more likely to be an iPod dev board if it is one.
That's newer than you think it is. That microcontroller family released in 2009.
Cumulus is the codename of the touchscreen controller on the iphone 5 - 6S (and possibly later, I don't have schematics saved here for anything newer than the 6S to hand and cba to search them out). I don't *think* that board has the actual Cumulus IC on it though so I guess it would plug into one of the connectors on a sub board
That micro looks to have a 2011 date code on it so given the antennas i'm guessing this is a test board for some portion of the cellular circuit for the iPhone 5
That micro looks to have a 2011 date code on it so given the antennas i'm guessing this is a test board for some portion of the cellular circuit for the iPhone 5
Appreciate all of the responses I had no idea so this really is super cool to hear. Amazed you guys figured that out so quick! I can’t get it to do much as the device just doesn’t seem to show up on my Mac. It does power on though. I’ve also noticed there’s are connections for flex cables like those seen on iPhones, iPads, iPod touches etc. there also appears to be a connection for a screen or a battery I’m assuming.
Try to get into contact with donglebookpro as well! He knows a lot about prototype stuff.
Is there anyone here who can read the Chinese characters in picture 7?
I'll try and reach out to him is he on Twitter? Also to recap the two small chips the antenna posts are between have the following markings:
"BCM5976C1"
"KUFBG"
"TE1241 P31"
"P9L2X N3A W"
The Atmel chip is legible and is a "ATSAM3U4C." The other chip I see reads as follows:
"EFTDI"
"1225-C"
"GO080771"
"FT232RL"
I cannot figure out what the Chinese characters say.
"BCM5976C1"
"KUFBG"
"TE1241 P31"
"P9L2X N3A W"
The Atmel chip is legible and is a "ATSAM3U4C." The other chip I see reads as follows:
"EFTDI"
"1225-C"
"GO080771"
"FT232RL"
I cannot figure out what the Chinese characters say.
Almost 1.2 billion
This is just a common serial chip.
The SAM chip is an ARM core microcontroller - a fancy arduino basically.
Google Translate thinks it says "high value"
Similar threads
