TwiggyMac - Convection Cooling Design Spec. badly botched in 128K thru Plus - Lots of TwiggyPics!

Trash80toHP_Mini

NIGHT STALKER
68040
Deletion of the Twiggy drive in 128K prototyping with substitution of the Sony 3.5" FDD was the root cause of a multitude of cooling/longevity issues for the Compact series.**

fritter-TwiggMac-00.jpg
fritter-TwiggMac-08.jpg

fritter-TwiggMac-07.jpg

Sheet metal enclosure on the Shugart 5.25" Drive Mechanism***** based Twiggy drive created a chimney effect. Blocking all but airflow past the hottest sections of the A/B and Flyback . . . as well as the section behind main connector for cooling the neck board

The Pirate Team renegades who went off to found Radius developed a fix for this omission, restoring design spec convection cooling of the Classic Mac form factor for dissipation of additional heat produced by their expansion cards where convection cooling had been inadequate in 128K as released:

Radius-TwiggyMac-Cooling-Restoration.JPG

Sony to Twiggy offset illustrates where punch stamped return bend support front bezel was affected. Front vent went unblocked on both sides of 5.25->3.5. raised drive adapter foot. Sony FDD's open high hat adapter cage positioning induced all manner of turbulence to cleaner, design spec convection airflow chimney effects of the Twiggy enclosure. Makes me wondered if at that very late, much too close to release date when SJ finally relented to NIH FDD replacement, the team ever even smoke tested the Sony mod?

mac5.jpg

TLDL: the rest of TwiggyPix readily at hand, currently missing advert pic. etc. ___________________________________________________________________________________

fKBN1.jpg

fritter-TwiggMac-01.jpg

fritter-TwiggMac-02.jpg

Apple-Lisa-1.jpeg
Twiggy Lisa's front bezel looks far more period correct and pleasing to these very high mileage Mk.I OEM vision components.
467482210_1288540719236048_677084916126682194_n_1024x1024@2x.jpeg
Lisa-Twiggy_Bezel-00.jpg

Lisa_front-bezel.JPG

Lisa-Twiggy_Bezel-02.jpg



PiXL-lg.jpg
Very cool Mini Lisa with Twiggy and ersatz Sony 3.5" FDD inspired SD installation? Real deal for in house use would have been just killer!

pièce de résistance from AppleDesign and the wizards of frogdesign?.

10ee535a010c3504c947d924630c83ec.jpg


** All IMO based on long study of this specific subject and more than passing experience in airflow dynamics gained from HVAC Ducting, Dust Collection Ducting and Cyclone Separator design and fabrication IRL, sans formal fluid dynamics coursework.

***** You would not believe the flack I got on AppleFritter from Dr. Bob and company in that day for saying the Twiggy Drive in an exploded diagram illustration was a Shugart drive! It was, kinda . . . My GOOD/bad that.
 
Last edited:
No swivel feature, but the raised height/angled ergonomic correction provisions would have alleviated many of the 128K Mac's packaging, neck fatiguing and inexcusable design sins. I've always wondered why every known ZFP Case is flat on top? Angle the b***h!

I've long been treasuring a 17" (swiveling and portrait rotating) HP Display/Stand for some hack or other. Wild dreams of taking it down to bare metal, gussying it up (if not actually widening the works) and recreating that design make it well worth the storage space.

Heck, I even use it periodically.:D


edit: dang, inexcusably short edit window closed before I could thumbnail that SonyTwiggy pic.
 
Last edited:
Back
Top