Sonnet G3/250 for a PM6100/66

[highlandcattle]

Hiya all,

Sometime ago I bought a Sonnet G3 from Strimkind on here, but I don't have the actual software to make it work. On these forums I found Sonnet Crescendo EnablerV31. But it doesn't work, it freezes upon loading the extension. The Powermac works fine with extensions off. I also googled it and sadly it seems that I need an older version, but the Sonnet homepage turns up blank(all accelerator drivers seem to have been removed 0 .Anybody know where I can get older drivers?

Also can I use these cards with System 7.6.1 or do I need to use 8 or9?

 

[ClassicHasClass]

Odd, v3.1 should be universal. What version do you need? I can see if I have it around.

 

[highlandcattle]

I can't seem to find the posts on google which talked about the versions of drivers. But If you have any older versions I would be aces if you could upload them so I can check them out.

Btw do you know if you can use 7.6.1 or do I really need to use 8 or 9.

Thnaks so much already!

 

[ClassicHasClass]

I don't have any on the file server other than 3.1, but I have some floppies around somewhere that should have them.