SCSI2SD PowerBook adaptor 3D model

[likanen]

Does someone have a 3D model for scsi2sd PowerBook edition adapter to 2.5” frame?

 

[sutekh]

Perhaps not helpful, but I was about to draw one up and print it when recently faced with a similar question and instead just re-purposed the original drive's mounting brackets. Per the attached pic, after bending the tabs 90deg, the existing holes in the PowerBook version of SCSI2SD align perfectly (in my Duo at least).
 

 

[Crutch]

Agreed. The original drive mounting bracket works great in a Blackbird as well. 

 

[likanen]

Ok, I think for PB100 one needs to use SSD adapter as the native adapter (or two side clips) are side mounted.