Schematics for eMac? or bodging lifted pads?

[Hālian]

Yesterday, I recapped my 1.25 GHz eMac (logic board no. 820-1591-A). However, I lifted pads on two of the capacitors (C473, C447) because I'm a n00b at soldering, and since it's a multilayer board, I have no idea where the traces lead. Would anyone happen to have schematics, or be able to help me route bodge wires?

 

[herd]

You should be able to connect to, or at least measure, the remaining vias. On each capacitor, one probably goes to ground.

 

[Hālian]

You should be able to connect to, or at least measure, the remaining vias. On each capacitor, one probably goes to ground.

Yeah, I've been checking the negative leg of each capacitor, but am not sure where to route the other end of the bodge wires, lol.

 

[SparrowRat]

Should be able to scrape back solder mask and solder to the traces

 

[Hālian]

Removing the problematic capacitors, then resetting the PMU and SMC, fixed it.