PowerBook 100 black screen after recap

[mjhagen]

After recapping the screen (which didn’t show an image before) I see it flash the diagonal lines screen and sometimes even a gray-with-cursor screen. After that it just shows a black screen with the backlight on. On pressing the reset button it goes straight to the black screen, only when I remove the power and reapply it (from a bench power supply) it flashes the diagonal lines/gray screen.

Does anyone have an idea where I should look next to try and fix this?

 

[bibilit]

Logic board has been recapped ?

If not, won't work.

 

[mjhagen]

Hi bibilit, yeah, I've recapped the logic board (and all the other boards) as well.