Overclocking a Powerlogix Powerforce G3 in a Powerbase 180

[Zhinü]

Does anyone happen to have the manuals for the PowerLogix PowerForce G3? I want to try overclocking it, but can’t find anything about the round hex switches on top.

 

[lolo799]

Found this: https://www.oocities.org/red_quadra/accelerator/pf_g3.html

Or this: https://web.archive.org/web/20010305082002/http://www.powerlogix.com/support/freqchart.html
The switch closer to the center of the cpu board is the bus speed switch, the outermost is for the bus ratio.

 

[Zhinü]

Found this: https://www.oocities.org/red_quadra/accelerator/pf_g3.html

Or this: https://web.archive.org/web/20010305082002/http://www.powerlogix.com/support/freqchart.html
The switch closer to the center of the cpu board is the bus speed switch, the outermost is for the bus ratio.

Thank you so much! Will have to mess with this later.