I picked up a 300MHz Newer Technology G3 upgrade (the type that goes in the CPU slot on an 8600 etc.). Unfortunately it looks like it has had a bit of a rough life and three capacitors have been knocked off.
Photos attached at the end of the post, but basically while it might just work without, for stability and piece of mind, I'd prefer to replace the missing capacitors.
The capacitors of interest are C63, C67 and C82.
Does anyone have a similar card (Same PCB, same speed ideally, but most if not all the caps will almost certainly be the same on other speeds with the same board)? If so, would someone be able to take measurements of the capacitors on their card? Alternatively, I could take the measurements myself if someone in the UK was willing to loan me a card (if your card is also missing different caps, I could use mine as reference and replace them for you
).
Realise it is a long shot, but hopefully someone can help out.
Photos attached at the end of the post, but basically while it might just work without, for stability and piece of mind, I'd prefer to replace the missing capacitors.
The capacitors of interest are C63, C67 and C82.
Does anyone have a similar card (Same PCB, same speed ideally, but most if not all the caps will almost certainly be the same on other speeds with the same board)? If so, would someone be able to take measurements of the capacitors on their card? Alternatively, I could take the measurements myself if someone in the UK was willing to loan me a card (if your card is also missing different caps, I could use mine as reference and replace them for you
).Realise it is a long shot, but hopefully someone can help out.
