I am trying to repair a 820-0385-A PSU. However, the casing for resistor R309 is gone and the resistor is a dead short. Does anyone know what the value of this resistor is? Also, what is the black mold-like corrosion on the bottom of the PCB?
Use the SONY CR-44 PSU as a frame of reference for the voltages and minimum Current output you will need: +5V: 6.0A +12V Sweep: 1.25A +12V Disk: 2.1A -12V: 0.5A Sweep and Disk are not isolated, so you could drive both with a single +12V power line rated at 3.35A or higher. And no, a -12V...
Use the SONY CR-44 PSU as a frame of reference for the voltages and minimum Current output you will need: +5V: 6.0A +12V Sweep: 1.25A +12V Disk: 2.1A -12V: 0.5A Sweep and Disk are not isolated, so you could drive both with a single +12V power line rated at 3.35A or higher. And no, a -12V...
Thanks for the link, I saw this post but the answer wasn't definite. I just ordered the caps for them and was lucky enough to score a Sony power supply from eBay, probably end up using that anyway.
R309 , Brown Black gold gold , 1 ohm ?
First band not clear, maybe grey.
Just recapped one of these psu's, R309 on this psu is also not readable, measures around 1 ohm
Some pics found on the nternet
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.