Macintosh SE M5010 HD Bracket

[BadGoldEagle]

Hi there,

Thanks to Bibilit, I am now the proud owner of an SE with two floppy drives. It works great, but I think it would be even better if it was equipped with a SCSI2SD. 

Because of the two FDDs, conventional HDs won't fit properly. See Vectronics' pic of their HD-equipped M5010.

But what about an Apple bracket + SCSI2SD ?

Unfortunately, I don't have a spare HD/Empty bracket on hand to try. Do you know if it fits?

I started working on a bespoke M5010 SCSI2SD bracket. But perhaps this work is useless...

 

[omidimo]

This bracket helps keeping the board from touching any bare metal and it has worked for me. I bet you could just velcro it on top of it will be just fine. 

 

[BadGoldEagle]

Yeah that could work. But I'm afraid it might fall off even with Velcro.

I'm trying to replicate the lower part of the HD bracket : two tabs that slide into the FDD housing at one end, held up at the other (rear side) by two screws.

I can't really use metal, or can I ? 

I finished the design, but since I don't have a proper bracket at the moment (left it at my parent's house), the dimensions are not right. At all.

Dang it, should have remembered!

I think I will re-use the design from your link. At least for the securing the SCSI2SD to the bracket part.