• Hello Guest! We're hosting a challenge to welcome vintage Intel macs to the MLA during the month of July! See this thread for more information.

Macintosh II Repair Advice.

Hello everyone! This is my first post here, so please excuse me if I trip and stumble, I'm not the type to social-media.

However, I am proud to be given the opportunity to add a Macintosh II to my vintage Mac family. Repair and upgrade started immediately. The Mac II would turn on, PSU would click, and turn off. A common occurrence it seems.

-
1. Capacitors have been replaced with tantalum caps of equal value. (embarrassing solder job, don't look!)

2. Some more tricky axial capacitors that I thought would be culprit have been replaced. (Still no dice.)

3. PSU measurements have been taken, all outputs seem as they should, caps looked okay, too.
-

Things that have changed since I replaced the capacitors, is that now the speaker clicks when powered on! Before the re-cap, it wouldn't.

I've taken my multimeter to many different caps, chips, traces. I've begun to pull my own hair out, is there anything obvious I'm missing? Incredibly nervous, asking for help here. But I suppose that's how desperate I've become as for wanting to get this thing singing and dancing again. Any advice is greatly appreciated.

Thank you.
 

Attachments

  • 1.png
    1.png
    24.9 MB · Views: 3
  • 2.png
    2.png
    23.8 MB · Views: 3
Also, just to clarify, did you only recap the board, or did you also recap the PSU? These PSUs all need recapping.
 
Back
Top