Mac Plus analog board shield pins?

[Spacerog]

I am sure this is answered somewhere but i don;t even know what they are called to search for them.
What are the little black pins that hold the plastic shield to the side of the Mac Plus analog board? I have a 1986 board that uses the doubled sided tape which has completely deteriorated at this point and would like to clean off the tape and use the pins instead. Where do I find those? What do I search for?

 

[cheesestraws]

I think I got my bag of spares under the name of 'plastic rivets'

 

[Spacerog]

Yup. I found them.

"Snap-shank push-in blind rivets"
These are pretty close measurement wise

https://www.grainger.com/product/Push-In-Rivet-4FXT5

 

[obsolete]

Assuming they're the same as the SE and SE/30, I bought the ones suggested by zigzagjoe here and they fit perfectly: https://68kmla.org/bb/index.php?thr...d-se-30-analog-board-plastic-push-pins.47859/

 

[Spacerog]

I'm adding these other links here in case someone finds this thread and not the others.

https://www.digikey.com/en/products/detail/würth-elektronik/700973500/9488147

https://www.mouser.com/ProductDetail/Heyco/9034?qs=%252BoUD%2FvVO7K3dDExzm%2FusLw%3D%3D

 

[Spacerog]

I received the ones from Granger linked above, they are about 2mm longer than the original but work fine. If I order them again I will try one of the other sources.