Mac Classic - Floppy Drive Eject drive dont turn.

[MegaImg]

I have a Mac Classic that the Flppy Drive dont try to Eject. I just put in a good working floppy drive from a Mac SE/30 and on this machine, if I send the eject, dont work. The issue is on the logic board at this point. Any pointers what to check or replace.

 

[falen6]

take out the floppy drive and clean it. The ejection is driven by a motor and small gearbox

the gears in these gearbox's break or get seized with old dried up grease

to remove the gearbox there are 2 screws and the connector for the motor

the gearbox lid just clips together - carefully pull back the tabs and lift off the cover

 

[MegaImg]

Forgot to add, the drive have been service and new gear box...the issue is that the machine dont turn the eject motor...

 

[olePigeon]

Do you have a second floppy drive with which you can swap eject motors?

 

[MegaImg]

Do you have a second floppy drive with which you can swap eject motors?

I try another drive that is working and dont work on the Classic. Work fine on the SE/30