Jaz Drive on Mac SE

[alucard_victor]

hi guys.

 

I have Jaz drive 1gb, I connected it in my Mac SE but not mount in desktop, I needs some software to use this Jaz Drive?

 

1GB Jaz Drive Iomega

Mac SE, running Mac OS 7.3.5 40MB HDD, 4MB RAM

 

Thanks!

 

[porter]

What happens if you boot the Mac while the Jaz disk is inserted?

 

[alucard_victor]

nothing...

 

[alucard_victor]

the App. SCSIProbe has detected the jaz Drive but not mount in desktop.

thanks

 

[tmtomh]

You need the Iomega driver, which is usually installed as a Control Panel and an Extension.

If your Jaz disk still has its original formatting (or was reformatted using the Iomega formatting utility), then it should have an invisible copy of the driver on it, which will allow the Jaz drive to mount on your desktop even if the Mac SE doesn't have the driver installed.

For this to work, however, you need to turn on the drive, put a disk in it, and then turn on your Mac. In other words, your Mac needs to start up when the Jaz drive is already turned on and there is already a Jaz disk in the Jaz drive.

In that situation the drive should mount on the desktop even if you don't have the driver installed on your Mac's hard drive.

M

 

[alucard_victor]

I try this but not happend...

i use the Norton disk Editor for scan the SCSI interface and say me: Not Partition on this drive.

I can connect Jaz Drive in my Performa running Mac OS 9 to format Jaz disk?

but a i have a little problem, my Performa not this here, this in the house of my mother, in another city…

thanks!!!!!!!!!!!!

[]ss!!!

 

[madcow]

I bought one and it came with the driver. But it requires at least system 8.1. I only have 7.1. That sucks.