Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
I am doing a bit of modification to the inside of my Color Classic trying to fit a SSD solution. I need a move things around a little and I need a cable that can extend a 50 pin internal SCSI ribbon cable.
If you're good at soldering, you could probably make a little two-socket board... Or you might be able to talk one of the solder-wizards around here (of which I am not one) into making it for you
Or get a couple of crimp IDC connectors and some ribbon cable, and make one up to the desired length. If you don't have a proper crimping tool, a bench vise will do the job. Pliers even, if you're desperate. I did it with my teeth once, but I don't recommend that approach.
In that case, just get the IDC-50 male and lop off a redundant internal SCSI cable.
The ready-made cable is by far the most convenient.If not quite the most economical solution at $8.95, it's not far off. Even a single IDC-50M will be likely be a couple of bucks shipped.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.