dead Color Classic

ClassicHasClass · Nov 20, 2011

Well, the Color Classic is refusing to power on.

Inspected the logic board, caps look okay. Replaced PRAM battery, no difference. The PS makes a slight whine when powered on, so I think the PS is okay. Any ideas before I swap out the logic board (and is anyone selling one)?

zuiko21 · Nov 20, 2011

Just to be sure... you turned on both the switch at the rear and the power button on keyboard, didn't you?

ClassicHasClass · Nov 20, 2011

Yup.

mcdermd · Nov 20, 2011

Did you leave it plugged in overnight and try powering it on? For whatever reason, it often works on CCs that have been sitting unplugged for a while.

beachycove · Nov 20, 2011

Ditto. It used to be a standard piece of advice from EQuill also.

ClassicHasClass · Nov 21, 2011

Well, couldn't hurt

I'll report back tomorrow.

ClassicHasClass · Nov 23, 2011

Still dead. Any other suggestions to try?

beachycove · Nov 23, 2011

The logic board might be slightly out of alignment. Try re-inserting?

I have had this trouble with an LC575 for sure.

mcdermd · Nov 23, 2011

Me too. I forgot to flip the power switch and it startled me when it bonged as I slid the logic board in.

Bolle · Nov 23, 2011

What happens when you pull out the logic board and flip the switch on the back to the "on" position?

It should power on then, fan + HD should start spinning. Just to be sure its not your AB.

ClassicHasClass · Nov 23, 2011

Good suggestions. I should have thought about a loose logic board; that bit me several times on the ANS 500. I'll try this when I get home.

ClassicHasClass · Nov 27, 2011

No, analogue board tests fine. It's definitely the logic board.

Fortunately, someone was selling a Mystic upgrade with a custom back on eBay, so I figure I'll pick it up (he's local to me, so I can go "persuade" him to give me a refund if it's DOA }

). And it has the video mod onboard, so I guess it's as good a time for an upgrade as any.

ClassicHasClass · Dec 3, 2011

So the logic board came, and she fires right up, so it was the logic board. I'll debug it later. Now to get the right Enabler on the hard disk, since I love 7.1.

mcdermd · Dec 3, 2011

Capacitors, capacitors, capacitors, capacitors ... (I feel like Ballmer).

macman142 · Dec 3, 2011

Yep, capacitors.

ALL my CC's have the same problem (all FOUR).

I replaced the caps very carefully on one board as they were all visibly leaking. Still doesn't work though...

dead Color Classic

Similar threads